Select Vehicle



Categories

Tuning Gallery

Get the Flash Player to see the slideshow.

Posts Tagged ‘K24’

Porsche 996TT K24/18G 5bar FPR 625HP Tune

Wednesday, August 19, 2009 posted by SoftronicTuning.com - 814 views

Porsche 996TT K24/18G 5Bar FPR Upgrade 625HP Tune – $1995

Much like our other K24/18G upgrade tune, this ECU file keeps the stock injectors and boost solenoid and runs the much simpler 5bar fuel pressure regular. By having a fixed boost pressure of 1.2-1.3 bar, additional fuel is not needed. This turbo setup then produces the same low end turbo spool of the K24 but with a huge increase in the mid to top end RPM range from the 18G exhaust side upgrade. Inconjunction with corresponding mods, this ECU tune will take your vehicle up to 625HP to the crank. Modifications should be consulted with a installer and the assistance of Softronic to maximize the potential of your vehicle. For those running catless race pipes, Softronic raises the O2 limiters which trick the computer from throwing a CEL. This map is available for a 91 octane or 93 octane pump gas car as well.

Softronic flashes all the 996 Turbo cars via the OBDII port with the provided flasher cable. With their Flasher Client software, they are reading a full 1mb of the file to completely tune the ECU. Other companies claim to be able to do this, but are only read 128kb and making global changes. Softronic will also provided you with your original file. With this original file you can flash your car back to stock at any point. This map includes 2 revisions in the price. If revisions are necessary, you must provide the dyno sheet showing HP, TQ, Boost, and AFR as well as a Durametric datalog. The Durametric cable is required for the revisions to be considered.

Scan10273aAs tested on this 2002 996TT 6speed, this car made 501awhp and 549ft/lbs of torque on a Mustang AWD dyno. With a 25% drivetrain loss, that is a 625hp to the crank. The car was equipped with a high flow exhaust system, boost hoses, cold air intake, diverter valves, boost controller, 5bar FPR, and running 1.3bar on 109octane race gas.

What are the benefits/functions of going with Softronic compared to the competition?

  • Softronic does not require the removal of your ECU from the car. There is no down time at all.
  • Your car can be flashed at your convenience from the comfort of your own garage.
  • Softronic reflashing is done via a Client Cable that is connected to the OBDII port. The customer simply plugs the cable into the car and reads the file with a laptop per the instructions with the cable. Once the file is downloaded, it is emailed to the Softronic secure server where the file is tuned and then emailed back to the client. The client simply uploads the file and they are done. Total process is about 1 hour.
  • Reflashing is done according to the vehicles octane level of pump gas and modifications are taken into account (Intake, Headers, Exhaust) to enhance power gains.
  • All ECU Flashes include FREE of charge the ability to use the Durametric diagnostic tool with the Basic Flash Cable included in the flash price.  This is a $287 value at no additional cost to you!
If you have any questions about the Porsche 996TT 625HP ECU File, please contact us using our Support Page.

Buy Now

--------------------------------------------------------------------------------

Porsche Cayenne Turbo 4.8L V8 DFI 08+

Wednesday, August 19, 2009 posted by SoftronicTuning.com - 862 views

Porsche Cayenne Turbo 4.8L V8 DFI – $1995

The 2008 and up Porsche Cayenne is a big change over previous models. The new Cayenne Turbo has switched from a Bosch ECU to now running a Siemens SDI system. The new 4.8L engine is much more equipped over the previous 4.5L. With stock 500hp at the crank, Softronic has some extra to give the Cayenne Turbo to get you another 60 horsepower to the crank. Softronic has spent time engineering software for the FSI cars and is one of the only tuners in the world that can offer an ECU flash via the OBDII port.

Turbo Stock Power – 500HP and 516ft/lbs
Tuned Power – 560HP and 585ft/lbs
Turbo S Stock Power – 550HP and 553ft/lbs
Tuned Power – 600HP and 595ft/lbs

Softronic flashes the Cayenne Turbo through the OBDII port of the car. With their Flasher Client software, they are reading a full 1mb of the file to completely tune the ECU. Other companies claim to be able to do this, but are only read 128kb and making global changes. The ECU flash will alter your boost, fuel, and timing maps to give you a very dominating increase of power over stock. For those worried about check engine lights, there are none! Once the car is flashed, the low end torque and throttle response will be much improved. Turbos will spool quicker and the flash will have the Cayenne pulling hard to redline. The overall improvement of drivability makes the Cayenne Turbo even more fun then it was originally. Since warranty is always a concern, Softronic also provides you with your original file. With this original file you can flash your car back to stock at any point. If you go to the dealer, there will be nothing visible through the Porsche PIWIS system. Softronic can program your vehicle no matter what country you are from or what octane you use. We have different maps for those running 91 octane or 93 octane and higher.

What are the benefits/functions of going with Softronic compared to the competition?

  • Softronic does not require the removal of your ECU from the car. There is no down time at all.
  • Your car can be flashed at your convenience from the comfort of your own garage.
  • Softronic reflashing is done via a Client Cable that is connected to the OBDII port. The customer simply plugs the cable into the car and reads the file with a laptop per the instructions with the cable. Once the file is downloaded, it is emailed to the Softronic secure server where the file is tuned and then emailed back to the client. The client simply uploads the file and they are done. Total process is about 1 hour.
  • Reflashing is done according to the vehicles octane level of pump gas and modifications are taken into account (Intake, Headers, Exhaust) to enhance power gains.
  • All ECU Flashes include FREE of charge the ability to use the Durametric diagnostic tool with the Basic Flash Cable included in the flash price.  This is a $287 value at no additional cost to you! DFI cars require you to clear codes once you flash the car.  You can see the HOW TO here.
If you have any questions about the Porsche Cayenne Turbo FSI ECU Flash, please contact us using our Support Page.

Buy Now

--------------------------------------------------------------------------------